PURE SINE WAVE High suitable for electricity, and most electrical products can be used. SMART COOLING Comes with an intelligent cooling fan, starts when the internal temperature is 104℉ or the load reaches 40% of the rated power. Temperature control, load control. LED DISPLAY Easy to know the condition of inverter. The input voltage and output power are shown cyclically on the display. In addition, when protection is activated, the display also shows the respective protection indication. LO: Input low voltage protection. HI: Input overvoltage protection. OH: Overheat protection. OL: Overload protection. PURE COPPER WIRES Compared to other wires, energy consumption and heat generation are low, further increasing efficiency. The wires are fixed with nuts, making it more secure. STURDY CASE Made from aluminum, it is more durable than other plastic cases. A slight drop or impact will not affect the internal parts. REMOTE CONTROLLER With a remote control of about 4.5m, inverter can be controlled in a long distance. And there is also a protection indicator lamp on the remote control, more easily to know that if it is be protected when you turn it on without looking at the display. About GIANDEL GIANDEL is a professional Power Inverter supplier and has been a leading inverter brand in Australia. GIANDEL pure sine wave inverters are more compatitable and widely used for inductive loads such as Laptop, Linear Adaptor, switching power supply, motor, freezers, fans and so on. They decrease the rush current and have lower interference, reduce the noise,prolong the device life. Specifications: Wave form: Pure sine wavePower (2 AC Outlets): 1200W Max Efficiency 90%THD ≤3%USB output: 1xDC 5V/2.1A(max)Nominal input voltage: 12V(9.8-16VDC)Nominal output voltage: 110-120VACInternal fuses: 30A No load current: 0.7-0.9ABattery cables(6AWG): one pair with length of 2 ft.Remote controller: remote controller with 15ft cable. More convenient to control the inverter ON/OFF Fully safety protections: Input over-voltage shutdown: 16VDC±0.5VInput low-voltage shutdown: 9.5VDC±0.5VInput low-voltage alarm: 9.8VDC±0.3VOver-heat protection: 65±5℃Over-load protection: 1300W More details and tips: Connect the inverter to a 12V battery with the standard cables provided with product, and plug your AC devices into the inverter.Please do not leave the power inverter in the ON position while your car is off.Disconnect the positive battery terminal before doing any wiring to the inverter.Do not put the inverter into sunlight directly, keep it in cool and dry environment.Don’t use the inverter with a product that draws a higher wattage the inverter can provide,as this may cause damage to the inverter and product. Package List: 1x 1200W Sine Wave Power Inverter2x Battery Cables1x Remote Controller with 15 ft Cable1x Manual 8xshockproof pads Shockproof pads Manual